Sign In | Join Free | My chinaqualitycrafts.com
China MINGCHENG GROUP LIMITED logo
MINGCHENG GROUP LIMITED
Customer First, Dedication, Innovation. MC Silicone Professional Mould Making & Casting Materials Supplier
Verified Supplier

5 Years

Home > Silicone Encapsulants >

50 Shore Flame Resistance 2 Part 1:1 Silicone Encapsulants For Connectors Sensor

MINGCHENG GROUP LIMITED
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment
Contact Now

50 Shore Flame Resistance 2 Part 1:1 Silicone Encapsulants For Connectors Sensor

Brand Name : MC SILICONE

Model Number : MCSIL-E160 A/B

Certification : MSDS

Place of Origin : China

MOQ : 240

Price : Negotiable

Payment Terms : L/C, , T/T, Western Union, PayPal ,

Supply Ability : 4000kgs/day

Delivery Time : about 3-5 working days after payment

Packaging Details : 1kg/can , 5kg/can , 10kg/drum , 20kg/drum , 25kg/drum , 200kg/drum

Product Name : Silicone in Primary froms

HS Code : 39100000

Viscosity : 3700 cps

Mixing ratio : 1:1

Working time : 30-40mins

Hardness : 50-60 shore A

Thermal conductivity(W/m·K) : ≥0.6

Applications : general potting material for electronics power supplies

Contact Now

Good Flowability Flame Resistance Two-Part 1 To 1 Mix Silicone Encapsulant For General Potting For Connectors Sensors

Product Description
Silicone Encapsulant 160 Silicone Elastomer is a two component, room temperature or heat curing encapsulant that is used for general potting applications of power supplies. It has good flowability, moderate thermal conductivity, and flame resistance.

Typical Use
General potting applications: power supplies, connectors, sensors, industrial controls, transformers, amplifiers, high voltage resistor packs, relays.

Features

Easy mix with 1:1 proportion

Low viscosity, good flow ability

Room temperature cure or heat up cure

Thermal conduction, flame resistance

BENEFITS
Rapid, versatile cure processing controlled by temperature
Can be considered for uses requiring added flame resistance

50 Shore Flame Resistance 2 Part 1:1 Silicone Encapsulants For Connectors Sensor50 Shore Flame Resistance 2 Part 1:1 Silicone Encapsulants For Connectors Sensor

Technical datasheet of Electronic Potting Silicone Compound& Encapsulates

Item No. MCSIL-E160
Before curing
Appearance A: White B: Dark Gray
Viscosity (mPa.s 25°C) 3000~6000
Density (g/cm3 ) 1.57±0.02
Working life (min 25°C) 30
Curing time (hrs) 24
Heat-up at 100°C (min) 10
After curing
Hardness (shore A) 50~60
Dielectric breakdown voltage kv/mm 25°C ≥20
Volume resistivity ohm*cm 1*1015
Tensile Strength Mpa ≥0.6
Thermal conductivity cm/°C 0.525*10-3
Working temperature °C -30~200

Note: Mechanical and electrical performance data tested at 25°C 7 days after curing, relative humidity of 55%; all the tested data is average value.

Using Instructions of Electronic Potting Silicone Compound& Encapsulates

1. Preparing: clean up the coating surface, remove the rust, dust, oil dirt.

2. Pouring: weigh the silicone and catalyst correctly, mix silicone part A and part B thoroughly, pour onto the electronic components/surface after vacuum degassing.

3. Curing: room temperature cure or heat-up cure is both workable.

It should be use up after open the package, the material must be kept in a cool place sealed well, and it should avoid from contactwithmoisture in the air.

MIXING AND DE-AIRING
These products are supplied in a 1 to 1 mix ratio, which is very robust in manufacturing environments and allows for some process and dispense equipment variation. In most cases de-airing is not required.

PREPARING SURFACES
In applications requiring adhesion, priming will be required for many of the silicone encapsulants. For best results, the primer should be applied in a very thin, uniform coating and then wiped off after application. After application, it should be thoroughly cured prior to application of the silicone encapsulant. . Additional instructions for primer usage can be found in the information sheets specific to the individual primers.

Packaging of Electronic Potting Silicone Encapsulates

Packs are available in 20kg and 200kg per drum.

50 Shore Flame Resistance 2 Part 1:1 Silicone Encapsulants For Connectors Sensor

Storage & Transportation of Electronic Potting Silicone Encapsulates

Keep it from strong sunshine, heat, and store in cool & dry place, well sealed. It has a shelf life of 12 months.

It can be stroked and transported as non-dangerous goods.


Product Tags:

2 Part 1:1 Silicone Encapsulants

      

Flame Resistance Silicone Encapsulants

      

50 Shore grey silicone sealant

      
Quality 50 Shore Flame Resistance 2 Part 1:1 Silicone Encapsulants For Connectors Sensor for sale

50 Shore Flame Resistance 2 Part 1:1 Silicone Encapsulants For Connectors Sensor Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: MINGCHENG GROUP LIMITED
*Subject:
*Message:
Characters Remaining: (0/3000)